How to run the jummp man software at the summit?

The software can be run inside the stefan:13 vnc (tcs3 is the
user account where there software resides).

Cybex: 
   jumppc is connect to '1B', or the old nsfcam pc cybex connector.

Remote Power
   nsfpwr RPC is used.
      outlet 5 provides PC power.
      outlet 6 provides power to the SBC and other top ring devices.
      Use 'rpcm' to control the power.

0. Power up and booted.
   use the 'rpcm' gui to power up the PC and top ring electonics.
   check the cybex to insure the PC has booted up properly... PC is connect to 1B on the cybex.

1. Connect to tcs3's stefan:13 VNC session.
   (Use workspace #2)

2. Starting the IC:

   1. open a xterm in the vnc session.

   2. ssh jumppc -l tcs3

   3. cd src/jumpman/dev/ic

   4. ic

3. Starting the XUI:

   1. open a xterm in the vnc session.

   2. ssh jumppc -l tcs3

   3. cd src/jumpman/dev/xui

   4. xui