Hardware Power ON

@(#) SPARCengine(tm)Ultra(tm) THEMIS-USPIIi-1v  3.10.7 Build.18.SKY created 1999/01/05 14:06
Probing for keyboard entry to skip POST 
Enter Checking KB 
ps/2 kbd check: 0000.0000.0000.00fe

Checking Sun KB Done
%o0 = 0000.0000.0055.4001

Executing Power On SelfTest



SPARCengine(tm)Ultra Themis USPIIi-1V POST 1.12   Dated/11/19/1998

Time Stamp [hour:min:sec] 1f:16:13


Init POST BSS

	Init System BSS


Probing system keyboard
 : Done

DMMU TLB Tags

	DMMU TLB Tag Access Test

DMMU TLB RAM

	DMMU TLB RAM Access Test

Ecache Tests

	Probe Ecache

	ecache_size = 0x00100000

	Ecache RAM Addr Test

	Ecache Tag Addr Test

	Ecache RAM Test

	Ecache Tag Test

	Invalidate Ecache Tags

All CPU Basic Tests

	V9 Instruction Test

	CPU Tick and Tick Compare Reg Test

	CPU Soft Trap Test

	CPU Softint Reg and Int Test

All Basic MMU Tests

	DMMU Primary Context Reg Test

	DMMU Secondary Context Reg Test

	DMMU TSB Reg Test

	DMMU Tag Access Reg Test

	DMMU VA Watchpoint Reg Test

	DMMU PA Watchpoint Reg Test

	IMMU TSB Reg Test

	IMMU Tag Access Reg Test

	IMMU TLB RAM Access Test

	IMMU TLB Tag Access Test

All Basic Cache Tests

	Dcache RAM Test

	Dcache Tag Test

	Icache RAM Test

	Icache Tag Test

	Icache Next Test

	Icache Predecode Test

Sabre MCU Control & Status Regs Init and Tests

	Init Sabre MCU Control & Status Regs

Memory Probe and Init

	Probe Memory

		INFO: All the memory Group in 10 bit column mode


***********************

STATUS =FAILED

TEST   =Probe Memory

SUSPECT=Upper Memory Board 

MESSAGE=DIMM Undetected




Status of this POST run:	FAIL

manfacturing mode=CHAMBER


Power On Selftest Completed
    Status  = 0000.0000.0000.0001 ffff.ffff.f00d.2e00 019f.3333.0a50.0011

Software Power ON

@(#) SPARCengine(tm)Ultra(tm) THEMIS-USPIIi-1v  3.10.7 Build.18.SKY created 1999/01/05 14:06
Enter Checking KB 
ps/2 kbd check: 0000.0000.0000.00fe

Checking Sun KB 
Clearing E$ Tags  Done
Clearing I/D TLBs Done
Probing Memory 
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0000
Done
Clearing Memory...Done
MEM BASE = 0000.0000.0000.0000
MEM SIZE = 0000.0000.0000.0000

Memory Problem Detected.
No further progress is possible.

Please Re-Install Memory and try again.