Hardware Power ON

@(#) SPARCengine(tm)Ultra(tm) THEMIS-USPIIi-1v  3.10.1 Alpha.13 created 1998/06/16 14:26
Probing for keyboard entry to skip POST 
Enter Checking KB 
ps/2 kbd check: 0000.0000.0000.00fe.
Checking Sun KB Done
%o0 = 0000.0000.0055.4001

Executing Power On SelfTest

There is no POST in this PROM.

Clearing E$ Tags  Done
Clearing I/D TLBs Done
Probing Memory 
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0108
Done
MEM BASE = 0000.0000.2000.0000
MEM SIZE = 0000.0000.0400.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.289c
PC = 0000.0000.0000.28e0
Decompressing into Memory Done
Size = 0000.0000.0008.1260
ttya initialized
Incorrect configuration checksum; 
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:0 POR:1 
UltraSPARC-IIi Version 1.2 (E$=256 KB) 2-2 module
Advanced PCI Bridge Version 1.1
Probing Memory Group #0  64 +  64 : 128 Megabytes
Probing Memory Group #1   0 +   0 :   0 Megabytes
Probing Memory Group #2   0 +   0 :   0 Megabytes
Probing Memory Group #3   0 +   0 :   0 Megabytes
Probing Floppy: No drives detected
Probing UPA Slot at 1e,0 SUNW,ffb 
Probing /pci@1f,0/pci@1,1 at Device 1  network 
Probing /pci@1f,0/pci@1,1 at Device 2  scsi disk tape scsi disk tape 
Probing /pci@1f,0/pci@1,1 at Device 3  Nothing there
Probing /pci@1f,0/pci@1,1 at Device 4  Nothing there
Probing /pci@1f,0/pci@1 at Device 1  Nothing there
Probing /pci@1f,0/pci@1 at Device 2  Nothing there
Probing /pci@1f,0/pci@1 at Device 3  Data Access Error
ok
ok
ok ok banner
SPARCengine(tm)Ultra(tm) THEMIS-USPIIi-1v (UltraSPARC-IIi 270MHz), No Keyboard
OpenBoot 3.10.1 Alpha.13, 128 MB memory installed, Serial #16777215.
Ethernet address ef:ff:ff:ff:ff:ff, Host ID: ffffffff.


The IDPROM contents are invalid
 ok banner
SPARCengine(tm)Ultra(tm) THEMIS-USPIIi-1v (UltraSPARC-IIi 270MHz), No Keyboard
OpenBoot 3.10.1 Alpha.13, 128 MB memory installed, Serial #16777215.
Ethernet address ef:ff:ff:ff:ff:ff, Host ID: ffffffff.


The IDPROM contents are invalid