Notes on WTI NPS-8HS20-1 

Spex uses a NPS-8HS20-1 Network power switch to control power to the callamp.
Here are the note on setting up the unit.
The manual are in the vendor's directory on this web site.

The WTI's hostname for spex is call hotdog.

Network Setup

The unit comes with a RJ-45 to DB9F convert (PN DX9F-DTE-RJ). Initial configuration 
can be done using this cable and a PC.

Connect the unit to your PC's serial port. Setup for serial port:
   9600, 8, 1, NoParity, CTS (Hadware handshake).

I used littledog & minicom. 

login as 'super', 'super'

/N for network configuration:
   IP 192.168.1.17    for spex-lamp-wti 
   Gateway: leave undefined so no access beyond subnet.
	Telnet access: on
	Web access:    on

Configuration Part 2
Connect using a web brower and finish the configuration:

General Parameters -> System Parameter: Site-ID: littledog

General Parameters -> Real Time Clock:  setup timezone, NTP to duke, goblin (optional)

User Configuration -> Add User: spex pahoa  allow ssh, telnet, web.

Plug Parameters:
   Plug Name     SeqDelay Default   Priority
     A1 LAMP_QTH    0.5    OFF         1
     A2 LAMP_INC    0.5    OFF         1
     A3 LAMP_IR     0.5    OFF         1
     A4 LAMP_AR     0.5    OFF         1
     A5 unused      0.5    OFF         1
     A6 unused      0.5    OFF         1
     A7 unused      0.5    OFF         1
     A8 unused      0.5    OFF         1

Telnet example

telnet spex-lamp-wti -l spex

/H  - help
/S  - redisplay plug status

/OFF *, Y   - turns off all plug. Adding ", Y" 
/ON  1, Y   - turns on 1.
/ON 1+2, Y  - turns on 1 and 2

/X          - disconnects