; @Id: FlashSecurity.txt#1 @ ; ; Edit this file to adjust the Flash security for this project. ; Flash security is provided by marking a 64 byte block with a character ; that corresponds to the type of security for that block, given: ; ; W: Full (Write protected) ; R: Field Upgrade (Read protected) ; U: Unprotected ; F: Factory ; Note #1: Protection characters can be entered in upper or lower case. ; Note #2: Refer to the Flash Program Memory Protection section in the Data Sheet. ; Various parts with different Flash sizes can be used with this file. ; Security settings for Flash areas beyond the part limit will be ignored. ; Comments may be added similar to an assembly language comment, by ; Using the semicolon (;) followed by your comment. The comment extends ; to the end of the line. ; 0 40 80 C0 100 140 180 1C0 200 240 280 2C0 300 340 380 3C0 (+) Base Address W W W W W W W W W W W W W W W W ; Base Address 0 W W W W W W W W W W W W W W W W ; Base Address 400 W W W W W W W W W W W W W W W W ; Base Address 800 W W W W W W W W W W W W W W W W ; Base Address C00 ; End 4K parts W W W W W W W W W W W W W W W W ; Base Address 1000 W W W W W W W W W W W W W W W W ; Base Address 1400 W W W W W W W W W W W W W W W W ; Base Address 1800 W W W W W W W W W W W W W W W W ; Base Address 1C00 ; End 8K parts W W W W W W W W W W W W W W W W ; Base Address 2000 W W W W W W W W W W W W W W W W ; Base Address 2400 W W W W W W W W W W W W W W W W ; Base Address 2800 W W W W W W W W W W W W W W W W ; Base Address 2C00 W W W W W W W W W W W W W W W W ; Base Address 3000 W W W W W W W W W W W W W W W W ; Base Address 3400 W W W W W W W W W W W W W W W W ; Base Address 3800 W W W W W W W W W W W W W W W W ; Base Address 3C00 ; End 16K parts ; Copyright Cypress MicroSystems, 2002, All rights reserved.