Meritec-.100" Pitch Socket Interconnects

.100" Pitch Socket Interconnects

Meritec's socket interconnects are designed for .025" square or round pins. Termination may be housed individually or consolidated into Single Signal Carrier Systems (SSC) for grouped interfacing with single, dual or triple row headers. The drawings below represent both the high performance, cost effective SSI terminations and the impedance matched Ground Plane Interconnect (GPI) terminations, which are used for faster edge rate applications. Reconfiguration of Meritec's GPI Carrier Assemblies in the field is not recommended. See electrical test data performance.

AXIAL 1 x 2

PINOUTS

AXIAL 1 x 3

AXIAL 1 x 1

RIGHT ANGLE 1 x 2

RIGHT ANGLE 1 x 3

LOW PROFILE RIGHT ANGLE 1 x 2

L = Length in inches

MATERIAL AND FINISH

Contact Material: Phosphor bronze
Contact Finish: Selectively plated,
.000030" gold (min.) over
.000050" nickel(min.)
Dielectric Material: Liquid crystal polymer resin,
UL rated 94 V-O

.100" Pitch Socket Interconnects Termination Style Numbers

STYLE # TERMINATION SPACING PINOUT

00 No termination - -

01 Axial 1 x 2 .100"x.100" A

02 Axial 1 x 2 .100"x.100" B

03 Axial 1 x 3 .100"x.200" C

04 Axial 1 x 3 .100"x.100" D

05 Axial 1 x 3 .100"x.100" E

06 Axial 1 x 3 .100"x.100" F

07 Axial 1 x 3 .100"x.100" G

08 Axial 1 x 3 .100"x.100" H

09 Axial 1 x 3 .100"x.100" J

10 Axial 1 x 1 .100"x.100" -

21 Right angle 1 x 2 .100"x.100" A

22 Right angle 1 x 2 .100"x.100" B

23 Right angle 1 x 3 .100"x.200" C

24 Right angle 1 x 3 .100"x.100" D

25 Right angle 1 x 3 .100"x.100" E

26 Right angle 1 x 3 .100"x.100" F

27 Right angle 1 x 3 .100"x.100" G

28 Right angle 1 x 3 .100"x.100" H

29 Right angle 1 x 3 .100"x.100" J

41 Axial GPI 1 x 2 .100"x.100" A

42 Axial GPI 1 x 2 .100"x.100" B

44 Axial GPI 1 x 3 .100"x.100" D

51 Right angle GPI 1 x 2 .100"x.100" A

52 Right angle GPI 1 x 2 .100"x.100" B

54 Right angle GPI 1 x 3 .100"x.100" D

61 Right angle low profile 1 x 2 .100"x.100" A

71 Right angle GPI low profile 1 x 2 .100"x.100" A

XX Special applications - -