GuideDog

     Ethernet Addr:   0:80:b6:4:4:58
        IP Address:   128.171.165.74 (guidedogm)
                      128.171.79.151 (guidedogm)
              Type:   Themis 5/64 with 110 MHz microSPARC.
                      sun4m sparc sun4m
             Decal:   ?
     Serial Number:   S16983604

               CPU:    FMI,MB86904 (mid 0 impl 0x0 ver 0x4 clock 110 MHz)
               RAM:   64 MB
   DNS Domain Name:   ifa.hawaii.edu
  NIS+ Domain Name:   N/A - file based administration

SCSI:

1. /dev/dsk/c1t0d0
   desc: 
   device name: /iommu@0,10000000/sbus@0,10001000/SUNW,fas@0,8800000/sd@0,0

      s0   96mb    /root
      s1   192mb   swap
      s4   7.1gb   /aux1 - local data disk.
      s6   512mb   /usr
      s7   512mb   /aux  - contains /usr/local (user bin, lib, etc..)

SPARC Hardware:

SBUS slot 0: Antares Microsystem's SBus ConServer-1018
   A Fast/Wide/Single-Edned SCSI and 100 Base-TX Ethernet Adapter.
   Purchase info: P923499 in May 99.

SBUS slot 1: Integrix TGX120 TurboGX+ a Turbo GX+ compatible graphic
   accelerator with 2 MB VRAM (1280x1024) single buffer.
   Purchae info: P723239 on May 97 from ZZYZX.

Configuration Notes:
1. This is how I made the Fast-Wide SCSI the default boot disk:
   a. Put a permenant alias into the NVRAM mapping ndisk to device name:
      nvalias ndisk0 /iommu/sbus/SUNW,fas@0,8800000/sd@0,0
   b. set boot-device to new devalias
      setenv boot-device ndisk0

VME Hardware:

Ixthos IXZ4 - Quad SHARC DSP board (clocker/bcard)
   A23D23 at 0x1000 0000, len = 0x1000 0000.
   IXR1 - IXR01MS - 1M x32 SRAM module.
   IXR2 - IXR01MS - 1M x32 SRAM module.
   MPR module interface installed.

KSI/Odetic TPRO GPS timer board
   VME addresses: A16D16_ADDR   0x00002000
                  A24D16_ADDR   0x00002000
                  A32D32_ADDR   0x30002000

History:

04/97:
  Initial Configured Systems
  5/64-32-110 -  Purchase from themis P722913 on 03/97.
  32 MB RAM for themis 5/64 purchased from Certon P723154 on 4/97.
  Integrix TGX120 graphic card from ZZYZX P723239 on May 97 from ZZYZX.

06/98 - 6/64-32-110 S/N S17976101 failed. Unit was replaced by themis
   with another board (S16983604).

03/99:
   Upgraded from 2.51 to 2.6. See
    guidedog.0399.txt for notes.

06/21/99:
   Installed Antares SBus ConServer-1018 F/W SCSI and 100TX ethernet.
   installed configured SEAGATE-ST39173W 9GB disk as boot/data disk.

07/13/99:
   Install GTK 1.2.3 (which require perl to be installed).